Green Resources Network You: the most assured Security Download station! The latest software | Top ranking | Software classification | Special software | Forum post | Manufacturers Daquan

Your location: Green Resources Network To Software collection summary To Clear software Related collection
 The printer software Daquan _ printer software reset reset Daquan _ Canon / EPSON printer software reset

The printer software Daquan _ printer software reset reset Daquan _ Canon / EPSON printer software reset

Many users in the use of the printer probably encountered machine light is flashing, suggesting specific code etc.. This situation is generally counter inside the device reached the set value caused by this problem can be solved by that type of printer reset tool. Of course, the software is not a panacea, and can clear software can only solve the waste ink counter reset this problem. The software is not a panacea, other problems including "foreign body", "jam", "unrecognized cartridges, ink, printing is not clear" are independent with zero. Because of hardware problems or other problems can not use the software to solve problems beyond zero zero.

At present, various manufacturers with monopoly technology, set the counter in a variety of printing equipment, such as the time counter; waste ink print ink counters, counters, counters, counters and other supplies. Once the machine to counter the set value, usually refused to work; at the same time show is light is flashing, suggesting specific code and other faults, this time you need to use the software to reset the counter is cleared brush over zero. Click to enter : EPSON clear software , Canon clear software

How to use the software reset:

Double click to open software (computer XP system reset)

1, the "EEPROM" button (if the error such as 002, the point can be determined) Note: please put the other USB devices are closed, otherwise it will affect the operation of the software

2, the "Main" button for the waste ink counter reset (printer on a piece of paper and print out D=000.0, said zero success)

3, "Platen" plate ink pad (if there is zero error: error code 001, never mind, because the ink pad plate is loss of material, not of it, as long as not really bad, do not need to replace)

4, set up a waste ink absorption pad counter value (0): Ink Absorber Counter Absorber found, Main behind the value 0, then SET (this step can not operate)

5, close the printer to restart, test the printer (if not printed, please look at the monitor is not short of ink ink or other fault)

Hot topics recommended

The recommended